News Center
What is the hot plate of KT plate?
1. Foam the PS particles into a 2.5mm-3.0mm board core (one-time foaming) through the equipment. At this time, the board core is a coil material, generally 500 meters long. At this time, the board core should be stored at room temperature for half a month. (curing period), so that some of the waste gas from the core is discharged.
12
2023
/
06
Product performance of PP foam board
(1) Excellent heat resistance. Foamed PS is usually used at 80°C, foamed PE can only withstand 70-80°C, and foamed PP can withstand 120°C. When the foamed PP is placed at 120°C for 22 hours, the size shrinkage is less than 2%, and the foamed PE shrinks by about 40% under the same conditions. Therefore, foamed PP can be used in occasions where the service temperature exceeds 100°C.
12
2023
/
06
Introduction to the New Generation Art KT Board
As the backboard of advertising consumables, KT board has always been an indispensable product in advertising materials due to its special advantages: light weight, convenient cutting, low price, and wide range of uses.
12
2023
/
06
Tel：
Email：
Add：
No. 20, Puhuang Road, Changjiang Town, Rugao City, Jiangsu Province
Copyright © 2023 Nantong Meikun New Material Technology Co., Ltd All Rights reserved | Business License | SEO |
