News Center
What is the hot plate of KT plate?
Release time:
2023-06-12 10:41
1. Foaming PS particles into 2.5mm-3.0mm board cores through equipment (one-time foaming). At this time, the board core is made of coiled material, usually 500 meters long. At this time, the board core needs to be stored at room temperature for half a month (maturation period) to discharge some waste gas from the board core.
2. Veneer
Place two large rolls of stretched PS skins and two large rolls of matured board cores on the equipment at the same time, and fuse them together through the equipment's mold to form a complete board. The thickness of the dough is approximately 0.01m.
3. Whole package
When pasting the surface board onto the equipment, cut it into a length of 2.4m, and then trim it to a length of 0.9 × The entire board of 2.4 is packaged and shipped out of the factory.
Related news
The production process of ps foam board
1: By foaming PS particles into 2.5mm-3.0mm board cores through equipment (one-time foaming), the weight of the board core, which is the density of the board, can be controlled here, which is the hardness index of the secondary formed board. At this time, the board core is made of coiled material, usually 500 meters. At this time, the board core needs to be stored at room temperature for about 7 days (ripening period). The previous process was half a month, and after long-term practical research, it has been proven that one week is the ideal state. If the time is too short, the hardness of the board will not meet the expected requirements, and the thickness of the board will be too thick; Over time, the hardness of the board is too hard, but the thickness may be thinner. The ripening period is to discharge some of the waste gas from the board core.
The difference between removable adhesive
1、 The difference in painting methods from the screen: the movable back glue is an indoor photo, using water-based ink; Car stickers are usually sprayed with weak solvent ink by users. Water-based ink is not resistant to water or sunlight, so removable adhesive is mainly used indoors. The car stickers are made of water and oil resistant ink.
What are the superior properties of PU foam board?
1. The tensile strength is 265MPa, which is 2.5 times the strength of ordinary aluminum plates, making it a good choice for home building materials;2. The corrosion resistance is three times that of ordinary aluminum plate and twice that of stainless steel;
Product features of PVC free foam board
1. Characteristics of water resistance, flame retardancy, acid and alkali resistance, mothproof, lightweight, thermal insulation, sound insulation, and shock absorption2. It is processed equally with wood, and its processing performance is far superior to that of wood
Tel：
Email：
Add：
No. 20, Puhuang Road, Changjiang Town, Rugao City, Jiangsu Province
Copyright © 2023 Nantong Meikun New Material Technology Co., Ltd All Rights reserved | Business License | SEO |
